D7net
Home
Console
Upload
information
Create file
Create Folder
About
Tools
Path :
/
var
/
softaculous
/
myadmin49
/
..
/
typo8
/
..
/
wp64
/
..
/
drupal89
/
Filename :
settings.php
back
Edit
Copy
<?php // @codingStandardsIgnoreFile /** * @file * Drupal site-specific configuration file. * * IMPORTANT NOTE: * This file may have been set to read-only by the Drupal installation program. * If you make changes to this file, be sure to protect it again after making * your modifications. Failure to remove write permissions to this file is a * security risk. * * In order to use the selection rules below the multisite aliasing file named * sites/sites.php must be present. Its optional settings will be loaded, and * the aliases in the array $sites will override the default directory rules * below. See sites/example.sites.php for more information about aliases. * * The configuration directory will be discovered by stripping the website's * hostname from left to right and pathname from right to left. The first * configuration file found will be used and any others will be ignored. If no * other configuration file is found then the default configuration file at * 'sites/default' will be used. * * For example, for a fictitious site installed at * https://www.drupal.org:8080/mysite/test/, the 'settings.php' file is searched * for in the following directories: * * - sites/8080.www.drupal.org.mysite.test * - sites/www.drupal.org.mysite.test * - sites/drupal.org.mysite.test * - sites/org.mysite.test * * - sites/8080.www.drupal.org.mysite * - sites/www.drupal.org.mysite * - sites/drupal.org.mysite * - sites/org.mysite * * - sites/8080.www.drupal.org * - sites/www.drupal.org * - sites/drupal.org * - sites/org * * - sites/default * * Note that if you are installing on a non-standard port number, prefix the * hostname with that number. For example, * https://www.drupal.org:8080/mysite/test/ could be loaded from * sites/8080.www.drupal.org.mysite.test/. * * @see example.sites.php * @see \Drupal\Core\DrupalKernel::getSitePath() * * In addition to customizing application settings through variables in * settings.php, you can create a services.yml file in the same directory to * register custom, site-specific service definitions and/or swap out default * implementations with custom ones. */ /** * Database settings: * * The $databases array specifies the database connection or * connections that Drupal may use. Drupal is able to connect * to multiple databases, including multiple types of databases, * during the same request. * * One example of the simplest connection array is shown below. To use the * sample settings, copy and uncomment the code below between the @code and * @endcode lines and paste it after the $databases declaration. You will need * to replace the database username and password and possibly the host and port * with the appropriate credentials for your database system. * * The next section describes how to customize the $databases array for more * specific needs. * * @code * $databases['default']['default'] = [ * 'database' => 'databasename', * 'username' => 'sqlusername', * 'password' => 'sqlpassword', * 'host' => 'localhost', * 'port' => '3306', * 'driver' => 'mysql', * 'prefix' => '', * 'collation' => 'utf8mb4_general_ci', * ]; * @endcode */ $databases = []; /** * Customizing database settings. * * Many of the values of the $databases array can be customized for your * particular database system. Refer to the sample in the section above as a * starting point. * * The "driver" property indicates what Drupal database driver the * connection should use. This is usually the same as the name of the * database type, such as mysql or sqlite, but not always. The other * properties will vary depending on the driver. For SQLite, you must * specify a database file name in a directory that is writable by the * webserver. For most other drivers, you must specify a * username, password, host, and database name. * * Drupal core implements drivers for mysql, pgsql, and sqlite. Other drivers * can be provided by contributed or custom modules. To use a contributed or * custom driver, the "namespace" property must be set to the namespace of the * driver. The code in this namespace must be autoloadable prior to connecting * to the database, and therefore, prior to when module root namespaces are * added to the autoloader. To add the driver's namespace to the autoloader, * set the "autoload" property to the PSR-4 base directory of the driver's * namespace. This is optional for projects managed with Composer if the * driver's namespace is in Composer's autoloader. * * Transaction support is enabled by default for all drivers that support it, * including MySQL. To explicitly disable it, set the 'transactions' key to * FALSE. * Note that some configurations of MySQL, such as the MyISAM engine, don't * support it and will proceed silently even if enabled. If you experience * transaction related crashes with such configuration, set the 'transactions' * key to FALSE. * * For each database, you may optionally specify multiple "target" databases. * A target database allows Drupal to try to send certain queries to a * different database if it can but fall back to the default connection if not. * That is useful for primary/replica replication, as Drupal may try to connect * to a replica server when appropriate and if one is not available will simply * fall back to the single primary server (The terms primary/replica are * traditionally referred to as master/slave in database server documentation). * * The general format for the $databases array is as follows: * @code * $databases['default']['default'] = $info_array; * $databases['default']['replica'][] = $info_array; * $databases['default']['replica'][] = $info_array; * $databases['extra']['default'] = $info_array; * @endcode * * In the above example, $info_array is an array of settings described above. * The first line sets a "default" database that has one primary database * (the second level default). The second and third lines create an array * of potential replica databases. Drupal will select one at random for a given * request as needed. The fourth line creates a new database with a name of * "extra". * * You can optionally set prefixes for some or all database table names * by using the 'prefix' setting. If a prefix is specified, the table * name will be prepended with its value. Be sure to use valid database * characters only, usually alphanumeric and underscore. If no prefixes * are desired, leave it as an empty string ''. * * To have all database names prefixed, set 'prefix' as a string: * @code * 'prefix' => 'main_', * @endcode * * Per-table prefixes are deprecated as of Drupal 8.2, and will be removed in * Drupal 9.0. After that, only a single prefix for all tables will be * supported. * * To provide prefixes for specific tables, set 'prefix' as an array. * The array's keys are the table names and the values are the prefixes. * The 'default' element is mandatory and holds the prefix for any tables * not specified elsewhere in the array. Example: * @code * 'prefix' => [ * 'default' => 'main_', * 'users' => 'shared_', * 'sessions' => 'shared_', * 'role' => 'shared_', * 'authmap' => 'shared_', * ], * @endcode * You can also use a reference to a schema/database as a prefix. This may be * useful if your Drupal installation exists in a schema that is not the default * or you want to access several databases from the same code base at the same * time. * Example: * @code * 'prefix' => [ * 'default' => 'main.', * 'users' => 'shared.', * 'sessions' => 'shared.', * 'role' => 'shared.', * 'authmap' => 'shared.', * ]; * @endcode * NOTE: MySQL and SQLite's definition of a schema is a database. * * Advanced users can add or override initial commands to execute when * connecting to the database server, as well as PDO connection settings. For * example, to enable MySQL SELECT queries to exceed the max_join_size system * variable, and to reduce the database connection timeout to 5 seconds: * @code * $databases['default']['default'] = [ * 'init_commands' => [ * 'big_selects' => 'SET SQL_BIG_SELECTS=1', * ], * 'pdo' => [ * PDO::ATTR_TIMEOUT => 5, * ], * ]; * @endcode * * WARNING: The above defaults are designed for database portability. Changing * them may cause unexpected behavior, including potential data loss. See * https://www.drupal.org/developing/api/database/configuration for more * information on these defaults and the potential issues. * * More details can be found in the constructor methods for each driver: * - \Drupal\Core\Database\Driver\mysql\Connection::__construct() * - \Drupal\Core\Database\Driver\pgsql\Connection::__construct() * - \Drupal\Core\Database\Driver\sqlite\Connection::__construct() * * Sample Database configuration format for PostgreSQL (pgsql): * @code * $databases['default']['default'] = [ * 'driver' => 'pgsql', * 'database' => 'databasename', * 'username' => 'sqlusername', * 'password' => 'sqlpassword', * 'host' => 'localhost', * 'prefix' => '', * ]; * @endcode * * Sample Database configuration format for SQLite (sqlite): * @code * $databases['default']['default'] = [ * 'driver' => 'sqlite', * 'database' => '/path/to/databasefilename', * ]; * @endcode * * Sample Database configuration format for a driver in a contributed module: * @code * $databases['default']['default'] = [ * 'driver' => 'mydriver', * 'namespace' => 'Drupal\mymodule\Driver\Database\mydriver', * 'autoload' => 'modules/mymodule/src/Driver/Database/mydriver/', * 'database' => 'databasename', * 'username' => 'sqlusername', * 'password' => 'sqlpassword', * 'host' => 'localhost', * 'prefix' => '', * ]; * @endcode */ /** * Location of the site configuration files. * * The $settings['config_sync_directory'] specifies the location of file system * directory used for syncing configuration data. On install, the directory is * created. This is used for configuration imports. * * The default location for this directory is inside a randomly-named * directory in the public files path. The setting below allows you to set * its location. */ # $settings['config_sync_directory'] = '/directory/outside/webroot'; /** * Settings: * * $settings contains environment-specific configuration, such as the files * directory and reverse proxy address, and temporary configuration, such as * security overrides. * * @see \Drupal\Core\Site\Settings::get() */ /** * Salt for one-time login links, cancel links, form tokens, etc. * * This variable will be set to a random value by the installer. All one-time * login links will be invalidated if the value is changed. Note that if your * site is deployed on a cluster of web servers, you must ensure that this * variable has the same value on each server. * * For enhanced security, you may set this variable to the contents of a file * outside your document root; you should also ensure that this file is not * stored with backups of your database. * * Example: * @code * $settings['hash_salt'] = file_get_contents('/home/example/salt.txt'); * @endcode */ $settings['hash_salt'] = '[[hash_salt]]'; /** * Deployment identifier. * * Drupal's dependency injection container will be automatically invalidated and * rebuilt when the Drupal core version changes. When updating contributed or * custom code that changes the container, changing this identifier will also * allow the container to be invalidated as soon as code is deployed. */ # $settings['deployment_identifier'] = \Drupal::VERSION; /** * Access control for update.php script. * * If you are updating your Drupal installation using the update.php script but * are not logged in using either an account with the "Administer software * updates" permission or the site maintenance account (the account that was * created during installation), you will need to modify the access check * statement below. Change the FALSE to a TRUE to disable the access check. * After finishing the upgrade, be sure to open this file again and change the * TRUE back to a FALSE! */ $settings['update_free_access'] = FALSE; /** * External access proxy settings: * * If your site must access the Internet via a web proxy then you can enter the * proxy settings here. Set the full URL of the proxy, including the port, in * variables: * - $settings['http_client_config']['proxy']['http']: The proxy URL for HTTP * requests. * - $settings['http_client_config']['proxy']['https']: The proxy URL for HTTPS * requests. * You can pass in the user name and password for basic authentication in the * URLs in these settings. * * You can also define an array of host names that can be accessed directly, * bypassing the proxy, in $settings['http_client_config']['proxy']['no']. */ # $settings['http_client_config']['proxy']['http'] = 'http://proxy_user:proxy_pass@example.com:8080'; # $settings['http_client_config']['proxy']['https'] = 'http://proxy_user:proxy_pass@example.com:8080'; # $settings['http_client_config']['proxy']['no'] = ['127.0.0.1', 'localhost']; /** * Reverse Proxy Configuration: * * Reverse proxy servers are often used to enhance the performance * of heavily visited sites and may also provide other site caching, * security, or encryption benefits. In an environment where Drupal * is behind a reverse proxy, the real IP address of the client should * be determined such that the correct client IP address is available * to Drupal's logging, statistics, and access management systems. In * the most simple scenario, the proxy server will add an * X-Forwarded-For header to the request that contains the client IP * address. However, HTTP headers are vulnerable to spoofing, where a * malicious client could bypass restrictions by setting the * X-Forwarded-For header directly. Therefore, Drupal's proxy * configuration requires the IP addresses of all remote proxies to be * specified in $settings['reverse_proxy_addresses'] to work correctly. * * Enable this setting to get Drupal to determine the client IP from the * X-Forwarded-For header. If you are unsure about this setting, do not have a * reverse proxy, or Drupal operates in a shared hosting environment, this * setting should remain commented out. * * In order for this setting to be used you must specify every possible * reverse proxy IP address in $settings['reverse_proxy_addresses']. * If a complete list of reverse proxies is not available in your * environment (for example, if you use a CDN) you may set the * $_SERVER['REMOTE_ADDR'] variable directly in settings.php. * Be aware, however, that it is likely that this would allow IP * address spoofing unless more advanced precautions are taken. */ # $settings['reverse_proxy'] = TRUE; /** * Specify every reverse proxy IP address in your environment. * This setting is required if $settings['reverse_proxy'] is TRUE. */ # $settings['reverse_proxy_addresses'] = ['a.b.c.d', ...]; /** * Reverse proxy trusted headers. * * Sets which headers to trust from your reverse proxy. * * Common values are: * - \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_ALL * - \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED * * Note the default value of * @code * \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_ALL | \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED * @endcode * is not secure by default. The value should be set to only the specific * headers the reverse proxy uses. For example: * @code * \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_ALL * @endcode * This would trust the following headers: * - X_FORWARDED_FOR * - X_FORWARDED_HOST * - X_FORWARDED_PROTO * - X_FORWARDED_PORT * * @see \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_ALL * @see \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED * @see \Symfony\Component\HttpFoundation\Request::setTrustedProxies */ # $settings['reverse_proxy_trusted_headers'] = \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_ALL | \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED; /** * Page caching: * * By default, Drupal sends a "Vary: Cookie" HTTP header for anonymous page * views. This tells a HTTP proxy that it may return a page from its local * cache without contacting the web server, if the user sends the same Cookie * header as the user who originally requested the cached page. Without "Vary: * Cookie", authenticated users would also be served the anonymous page from * the cache. If the site has mostly anonymous users except a few known * editors/administrators, the Vary header can be omitted. This allows for * better caching in HTTP proxies (including reverse proxies), i.e. even if * clients send different cookies, they still get content served from the cache. * However, authenticated users should access the site directly (i.e. not use an * HTTP proxy, and bypass the reverse proxy if one is used) in order to avoid * getting cached pages from the proxy. */ # $settings['omit_vary_cookie'] = TRUE; /** * Cache TTL for client error (4xx) responses. * * Items cached per-URL tend to result in a large number of cache items, and * this can be problematic on 404 pages which by their nature are unbounded. A * fixed TTL can be set for these items, defaulting to one hour, so that cache * backends which do not support LRU can purge older entries. To disable caching * of client error responses set the value to 0. Currently applies only to * page_cache module. */ # $settings['cache_ttl_4xx'] = 3600; /** * Expiration of cached forms. * * Drupal's Form API stores details of forms in a cache and these entries are * kept for at least 6 hours by default. Expired entries are cleared by cron. * * @see \Drupal\Core\Form\FormCache::setCache() */ # $settings['form_cache_expiration'] = 21600; /** * Class Loader. * * If the APC extension is detected, the Symfony APC class loader is used for * performance reasons. Detection can be prevented by setting * class_loader_auto_detect to false, as in the example below. */ # $settings['class_loader_auto_detect'] = FALSE; /* * If the APC extension is not detected, either because APC is missing or * because auto-detection has been disabled, auto-loading falls back to * Composer's ClassLoader, which is good for development as it does not break * when code is moved in the file system. You can also decorate the base class * loader with another cached solution than the Symfony APC class loader, as * all production sites should have a cached class loader of some sort enabled. * * To do so, you may decorate and replace the local $class_loader variable. For * example, to use Symfony's APC class loader without automatic detection, * uncomment the code below. */ /* if ($settings['hash_salt']) { $prefix = 'drupal.' . hash('sha256', 'drupal.' . $settings['hash_salt']); $apc_loader = new \Symfony\Component\ClassLoader\ApcClassLoader($prefix, $class_loader); unset($prefix); $class_loader->unregister(); $apc_loader->register(); $class_loader = $apc_loader; } */ /** * Authorized file system operations: * * The Update Manager module included with Drupal provides a mechanism for * site administrators to securely install missing updates for the site * directly through the web user interface. On securely-configured servers, * the Update manager will require the administrator to provide SSH or FTP * credentials before allowing the installation to proceed; this allows the * site to update the new files as the user who owns all the Drupal files, * instead of as the user the webserver is running as. On servers where the * webserver user is itself the owner of the Drupal files, the administrator * will not be prompted for SSH or FTP credentials (note that these server * setups are common on shared hosting, but are inherently insecure). * * Some sites might wish to disable the above functionality, and only update * the code directly via SSH or FTP themselves. This setting completely * disables all functionality related to these authorized file operations. * * @see https://www.drupal.org/node/244924 * * Remove the leading hash signs to disable. */ # $settings['allow_authorize_operations'] = FALSE; /** * Default mode for directories and files written by Drupal. * * Value should be in PHP Octal Notation, with leading zero. */ # $settings['file_chmod_directory'] = 0775; # $settings['file_chmod_file'] = 0664; /** * Public file base URL: * * An alternative base URL to be used for serving public files. This must * include any leading directory path. * * A different value from the domain used by Drupal to be used for accessing * public files. This can be used for a simple CDN integration, or to improve * security by serving user-uploaded files from a different domain or subdomain * pointing to the same server. Do not include a trailing slash. */ # $settings['file_public_base_url'] = 'http://downloads.example.com/files'; /** * Public file path: * * A local file system path where public files will be stored. This directory * must exist and be writable by Drupal. This directory must be relative to * the Drupal installation directory and be accessible over the web. */ # $settings['file_public_path'] = 'sites/default/files'; /** * Private file path: * * A local file system path where private files will be stored. This directory * must be absolute, outside of the Drupal installation directory and not * accessible over the web. * * Note: Caches need to be cleared when this value is changed to make the * private:// stream wrapper available to the system. * * See https://www.drupal.org/documentation/modules/file for more information * about securing private files. */ # $settings['file_private_path'] = ''; /** * Temporary file path: * * A local file system path where temporary files will be stored. This directory * must be absolute, outside of the Drupal installation directory and not * accessible over the web. * * If this is not set, the default for the operating system will be used. * * @see \Drupal\Component\FileSystem\FileSystem::getOsTemporaryDirectory() */ # $settings['file_temp_path'] = '/tmp'; /** * Session write interval: * * Set the minimum interval between each session write to database. * For performance reasons it defaults to 180. */ # $settings['session_write_interval'] = 180; /** * String overrides: * * To override specific strings on your site with or without enabling the Locale * module, add an entry to this list. This functionality allows you to change * a small number of your site's default English language interface strings. * * Remove the leading hash signs to enable. * * The "en" part of the variable name, is dynamic and can be any langcode of * any added language. (eg locale_custom_strings_de for german). */ # $settings['locale_custom_strings_en'][''] = [ # 'forum' => 'Discussion board', # '@count min' => '@count minutes', # ]; /** * A custom theme for the offline page: * * This applies when the site is explicitly set to maintenance mode through the * administration page or when the database is inactive due to an error. * The template file should also be copied into the theme. It is located inside * 'core/modules/system/templates/maintenance-page.html.twig'. * * Note: This setting does not apply to installation and update pages. */ # $settings['maintenance_theme'] = 'bartik'; /** * PHP settings: * * To see what PHP settings are possible, including whether they can be set at * runtime (by using ini_set()), read the PHP documentation: * http://php.net/manual/ini.list.php * See \Drupal\Core\DrupalKernel::bootEnvironment() for required runtime * settings and the .htaccess file for non-runtime settings. * Settings defined there should not be duplicated here so as to avoid conflict * issues. */ /** * If you encounter a situation where users post a large amount of text, and * the result is stripped out upon viewing but can still be edited, Drupal's * output filter may not have sufficient memory to process it. If you * experience this issue, you may wish to uncomment the following two lines * and increase the limits of these variables. For more information, see * http://php.net/manual/pcre.configuration.php. */ # ini_set('pcre.backtrack_limit', 200000); # ini_set('pcre.recursion_limit', 200000); /** * Configuration overrides. * * To globally override specific configuration values for this site, * set them here. You usually don't need to use this feature. This is * useful in a configuration file for a vhost or directory, rather than * the default settings.php. * * Note that any values you provide in these variable overrides will not be * viewable from the Drupal administration interface. The administration * interface displays the values stored in configuration so that you can stage * changes to other environments that don't have the overrides. * * There are particular configuration values that are risky to override. For * example, overriding the list of installed modules in 'core.extension' is not * supported as module install or uninstall has not occurred. Other examples * include field storage configuration, because it has effects on database * structure, and 'core.menu.static_menu_link_overrides' since this is cached in * a way that is not config override aware. Also, note that changing * configuration values in settings.php will not fire any of the configuration * change events. */ # $config['system.site']['name'] = 'My Drupal site'; # $config['user.settings']['anonymous'] = 'Visitor'; /** * Fast 404 pages: * * Drupal can generate fully themed 404 pages. However, some of these responses * are for images or other resource files that are not displayed to the user. * This can waste bandwidth, and also generate server load. * * The options below return a simple, fast 404 page for URLs matching a * specific pattern: * - $config['system.performance']['fast_404']['exclude_paths']: A regular * expression to match paths to exclude, such as images generated by image * styles, or dynamically-resized images. The default pattern provided below * also excludes the private file system. If you need to add more paths, you * can add '|path' to the expression. * - $config['system.performance']['fast_404']['paths']: A regular expression to * match paths that should return a simple 404 page, rather than the fully * themed 404 page. If you don't have any aliases ending in htm or html you * can add '|s?html?' to the expression. * - $config['system.performance']['fast_404']['html']: The html to return for * simple 404 pages. * * Remove the leading hash signs if you would like to alter this functionality. */ # $config['system.performance']['fast_404']['exclude_paths'] = '/\/(?:styles)|(?:system\/files)\//'; # $config['system.performance']['fast_404']['paths'] = '/\.(?:txt|png|gif|jpe?g|css|js|ico|swf|flv|cgi|bat|pl|dll|exe|asp)$/i'; # $config['system.performance']['fast_404']['html'] = '<!DOCTYPE html><html><head><title>404 Not Found</title></head><body><h1>Not Found</h1><p>The requested URL "@path" was not found on this server.</p></body></html>'; /** * Load services definition file. */ $settings['container_yamls'][] = $app_root . '/' . $site_path . '/services.yml'; /** * Override the default service container class. * * This is useful for example to trace the service container for performance * tracking purposes, for testing a service container with an error condition or * to test a service container that throws an exception. */ # $settings['container_base_class'] = '\Drupal\Core\DependencyInjection\Container'; /** * Override the default yaml parser class. * * Provide a fully qualified class name here if you would like to provide an * alternate implementation YAML parser. The class must implement the * \Drupal\Component\Serialization\SerializationInterface interface. */ # $settings['yaml_parser_class'] = NULL; /** * Trusted host configuration. * * Drupal core can use the Symfony trusted host mechanism to prevent HTTP Host * header spoofing. * * To enable the trusted host mechanism, you enable your allowable hosts * in $settings['trusted_host_patterns']. This should be an array of regular * expression patterns, without delimiters, representing the hosts you would * like to allow. * * For example: * @code * $settings['trusted_host_patterns'] = [ * '^www\.example\.com$', * ]; * @endcode * will allow the site to only run from www.example.com. * * If you are running multisite, or if you are running your site from * different domain names (eg, you don't redirect http://www.example.com to * http://example.com), you should specify all of the host patterns that are * allowed by your site. * * For example: * @code * $settings['trusted_host_patterns'] = [ * '^example\.com$', * '^.+\.example\.com$', * '^example\.org$', * '^.+\.example\.org$', * ]; * @endcode * will allow the site to run off of all variants of example.com and * example.org, with all subdomains included. */ /** * The default list of directories that will be ignored by Drupal's file API. * * By default ignore node_modules and bower_components folders to avoid issues * with common frontend tools and recursive scanning of directories looking for * extensions. * * @see \Drupal\Core\File\FileSystemInterface::scanDirectory() * @see \Drupal\Core\Extension\ExtensionDiscovery::scanDirectory() */ $settings['file_scan_ignore_directories'] = [ 'node_modules', 'bower_components', ]; /** * The default number of entities to update in a batch process. * * This is used by update and post-update functions that need to go through and * change all the entities on a site, so it is useful to increase this number * if your hosting configuration (i.e. RAM allocation, CPU speed) allows for a * larger number of entities to be processed in a single batch run. */ $settings['entity_update_batch_size'] = 50; /** * Entity update backup. * * This is used to inform the entity storage handler that the backup tables as * well as the original entity type and field storage definitions should be * retained after a successful entity update process. */ $settings['entity_update_backup'] = TRUE; /** * Node migration type. * * This is used to force the migration system to use the classic node migrations * instead of the default complete node migrations. The migration system will * use the classic node migration only if there are existing migrate_map tables * for the classic node migrations and they contain data. These tables may not * exist if you are developing custom migrations and do not want to use the * complete node migrations. Set this to TRUE to force the use of the classic * node migrations. */ $settings['migrate_node_migrate_type_classic'] = FALSE; /** * Load local development override configuration, if available. * * Create a settings.local.php file to override variables on secondary (staging, * development, etc.) installations of this site. * * Typical uses of settings.local.php include: * - Disabling caching. * - Disabling JavaScript/CSS compression. * - Rerouting outgoing emails. * * Keep this code block at the end of this file to take full effect. */ # # if (file_exists($app_root . '/' . $site_path . '/settings.local.php')) { # include $app_root . '/' . $site_path . '/settings.local.php'; # } $databases['default']['default'] = array ( 'database' => '[[softdb]]', 'username' => '[[softdbuser]]', 'password' => '[[softdbpass]]', 'prefix' => '[[dbprefix]]', 'host' => '[[softdbhost]]', 'port' => '3306', 'namespace' => 'Drupal\\Core\\Database\\Driver\\mysql', 'driver' => 'mysql', ); $settings['config_sync_directory'] = '[[config_directories]]';